2PCS Flysky FS-R6B 2.4G 6CH Receiver - Miuezuth Radio Model Remote Control Receiver, Compatible with FS-I4 / FS-I6 / FS-I6X / FS-T6 / FS-I10 / FS-GT2E / FS-GT2G / FS-CT6B / FS-GT3B RC Transmitter Car

Note: If you use this receiver with FS-GT2E, please switch the transmitter's system to AFHDS before matching.
If you bind this receiver with fs-i6x, please turn off and switch RX 2A of the transmitter's receiver set.

2PCS Flysky FS-R6B 2.4G 6CH Receiver, Miuezuth Radio Model Remote Control Receiver, Compatible with FS-i4 / FS-i6 / FS-i10 / FS-GT2E / FS-GT2G

Specifications:
Channels: 6 Channels
Model Type: Heli, Airplane, Gliders
RF Power: Less than 20db
Modulation: GFSK
Code Type: PCM
Sensitivity: 1024
Low Voltage Warning: LED
DSC Port: Yes
Charger Port: Yes
Power suppy: 5V DC (1.5V AAA*4)

The supplied transmitter and receiver are already bound at production time so you don’t need to do it. If you are using another transmitter or receiver, you have to first bind them before use as described below:
A. Install batteries in the transmitter and turn it off.
B. Connect the binding jumper to the battery port of the receiver.
C. Connect the battery of the receiver to any channel power supply. The red LED with blink indicating that it is in binding mode.
D. Press and hold the bind key of the transmitter and turn it on.
E. The red LED of the received should stop to blink meaning a successful binding.
F. Disconnect the receiver battery.
G. Turn off then back on the transmitter.
H. Connect all the servos to the receiver and then connect its battery.
I. Check if all servos are working as expected.
J. If anything is wrong, restart this procedure from the beginning.

More options for you:
fs-ia6b: B07PHC79F8
fs-r6b: B07PLHCQ4C
fs-gr3e: B07PHF7G9Q
waterproof fs-gr3e: B07PHFC5J2
fs-bs6: B07PJJYQW6
fs-gr3f: B07PLJ9ZY1
fs-i6: B07QG575R5

• Compatible with FS-i4 / FS-i6 / FS-i10 / FS-GT2E / FS-GT2G / FS-T4B / FS-GT6B / FS-T6 / FS-TH9X / TH9b / Turnigy 9x v2 / FS-GT2 / FS-GT3B / FS-GT3C / FS-CT6B. Suitable for RC Car Boart Planes Crawlers Truck Helicopter, works with futaba servo. Work with 4V-8V battery. These spare 6ch receiver units are specifically for use with the Flysky 6ch CT6B pc programmable 2.4GHZ transmitters. For Model Type: Heli, Airplane, Gliders; with dsc port, charger port compatible with FlySky FS-T6. If you use the receiver with fs-i6/i6x, please go into settings and change the protocol to afhds not the 2a protocol. Note: If you use this receiver with FS-GT2E, please switch the transmitter's system to AFHDS before matching. Any problem please let us know feel free, thanks. Package List: 2 X Flysky FS-R6B Receiver, 2 X Bind plug. Any question please contact us feel free..